Algunos/todos los MP3 no se reproducen

MediaMonkey 3.x y 4.x incluyen plugins MP3 (in_dsmp3.dll e in_wmp3.dll respectivamente) que permiten a MediaMonkey usar el códec MP3 de Windows para reproducir archivos MP3. Aunque esto normalmente funciona sin problemas, hay varios casos en los que la reproducción de MP3 puede fallar:

  1. Archivos MP3 con CRC incorrectos o dañados. En estos casos, puedes probar un plugin MP3 alternativo como:
    in_mad.dll: Este complemento es excelente, especialmente si tiene una tarjeta de audio con una resolución de audio de más de 24 bits. Sin embargo, su desarrollo ya no está activo. También puede obtenerse a través de la página de complementos de entrada de MediaMonkey:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: este complemento se considera un complemento de alta calidad y se han resuelto las incompatibilidades de transmisión con MediaMonkey, sin embargo, ya no se desarrolla activamente.
    Se puede encontrar en: http://otachan.com/in_!mpg123.html

    Si reemplaza los complementos de entrada MP3 predeterminados con cualquiera de los anteriores, asegúrese de eliminar o deshabilitar los complementos actuales (por ejemplo, cambie in_wmp3.dll a in_wmp3.dll.off).

    Nota: Si desea verificar si un MP3 está dañado y/o repararlo, las siguientes herramientas de terceros pueden ser útiles:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Los archivos tienen una extensión incorrecta. Por ejemplo, a los archivos mp2 a veces se les asigna incorrectamente la extensión mp3. Para estos archivos, debe cambiar la extensión a mp2 e instalar el códec mp2:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. Si tiene una versión de Windows que no incluye el Reproductor de Windows Media ni los códecs válidos, no se reproducirán los archivos de audio. Para solucionarlo, deberá instalar los códecs que faltan .
  4. Si Windows Media Foundation y los Servicios del Sistema de Audio están dañados (esto se ha observado en algunas actualizaciones a Windows 10), no se reproducirán los archivos de audio. Para solucionarlo: a) Con REGEDIT, verifique que la clave "DependOnService" de "KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\" contenga solo "AudioEndpointBuilder RpcSs" y que no contenga una línea con "MMCSS". Si es así, elimínela y reinicie el sistema. b) Desde el símbolo del sistema, use el comando "sfc /scannow" para reparar los servicios "Windows Audio" y "Windows Audio Enpoint Builder" si faltan o tienen una configuración dañada. c) Reinstale el controlador de la tarjeta de sonido. Desinstale el existente -> Reiniciar el sistema -> Permitir que Windows instale el predeterminado o instalar la versión más reciente del fabricante del chipset de la tarjeta de sonido (Realtek, C-Media, Connexant, etc.).
  5. En algunos casos, también puede ocurrir que los códecs estén instalados, pero mal configurados. Aquí tienes un enlace a un breve tutorial sobre cómo corregir los códecs de Windows: http://www.looprecorder.de/tut_l3codec.php

Se aplica a:

Translated automatically (see original)

Some / All MP3s Don’t Play

MediaMonkey 3.x and 4.x include MP3 plugins (in_dsmp3.dll and in_wmp3.dll respectively) that allow MediaMonkey to use Windows’ MP3 codec to play MP3 files. Although this normally works without a problem, there are several cases in which MP3 playback can fail:

  1. MP3 files with bad CRCs or otherwise damaged files. In such cases, you can try using an alternative MP3 plugin such as:
    in_mad.dll: This plug-in is an excellent plug-in especially if you have an audio card capable of 24-bit+ audio resolution, but development of this plug-in is no longer active. It can also be obtained via the MediaMonkey Input Plug-ins page:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: This plug-in is considered to be a high-quality plug-in, and streaming incompatibilities with MediaMonkey have been resolved, however, it is no longer actively developed.
    It can be found at: http://otachan.com/in_!mpg123.html

    If you replace the default MP3 Input-Plug-ins with either of the above, make certain to remove or disable the current plug-ins (e.g. change in_wmp3.dll to in_wmp3.dll.off).

    Note: If you want to verify whether an MP3 is damaged, and/or fix them, the following third party tools may be helpful:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Files have an incorrect extension. For example, mp2 files are sometimes incorrectly assigned an mp3 extension. For such files, you should change the extension to mp2 and install the mp2 codec:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. If you have a version of Windows that doesn’t come with Windows Media Player and valid Codecs, then no audio files will play. To resolve, you’ll need to install the missing codecs.
  4. If Windows Media Foundation and Audio System Services have been corrupted (this has been observed on some upgrades to Windows 10), then all audio files will fail to play. To fix this: a) Using REGEDIT, verify that “KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\” Key “DependOnService” contains only “AudioEndpointBuilder RpcSs” and does _not_ contain a line with “MMCSS”. If it does, delete it and restart the system b) From the command prompt, use the “sfc /scannow” command to fix both “Windows Audio” and “Windows Audio Enpoint Builder” services if they are missing or have corrupted settings. c) Reinstall the Sound card driver. Uninstall existing -> Restart System -> Let Windows install default or install latest one from sound card chipset manufacturer (Realtek, C-Media, Connexant, …)
  5. In some cases, it may also be that codecs are installed, but that they are misconfigured. Here is a link to a brief tutorial re. fixing Windows Codecs: http://www.looprecorder.de/tut_l3codec.php

Applies to:

Hide original

¿Fue útil este artículo?